Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
keyboard:adi_5170 [11 Apr 2026 19:58] – coolpenguin1keyboard:adi_5170 [16 Apr 2026 17:58] (current) – coolpenguin1
Line 7: Line 7:
 | **Sense method** |Contact-based\\ Inductive| | **Sense method** |Contact-based\\ Inductive|
 | **Protocol** | AT | | **Protocol** | AT |
-| **Keycaps** | [[terminology:double-shot|Double-Shot ABS]], [[terminology:pad_print|Pad Printed]] |+| **Keycaps** | [[terminology:double-shot|Double-Shot ABS]], [[terminology:pad-print|ABS Pad-print]] |
  
 </WRAP> </WRAP>
Line 16: Line 16:
 ==== Construction ==== ==== Construction ====
 === Case and Internals === === Case and Internals ===
-The keyboard consists of three parts. A ABS top case, a ABS bottom case and a internal assembly. +The keyboard consists of three parts: a ABS top and bottom case, and an internal assembly 
 +==Top case==
 Externally, the top case has a pen holder and a lock-light sticker on the top right corner.\\ Internally, it has a cable gutter for routing the cable from the PCB to the cable cutout, cutouts for the lock-lights, threaded plastic standoffs to both hold the assembly in place and keep the case together, and a sticker for the keyboard's model number, part number and other manufacturing information. Externally, the top case has a pen holder and a lock-light sticker on the top right corner.\\ Internally, it has a cable gutter for routing the cable from the PCB to the cable cutout, cutouts for the lock-lights, threaded plastic standoffs to both hold the assembly in place and keep the case together, and a sticker for the keyboard's model number, part number and other manufacturing information.
 +==Bottom case==
 Externally, the bottom case has eight screws to secure the assembly and case, a model sticker showing the keyboard's model number, serial number and country of origin, and six total feet. two being flip-out feet for adjusting the keyboard's angle and four being non-slip feet.\\ Internally, it features the flip-out feet mechanism and a sticker with identical information to the one found internally on the top case. Externally, the bottom case has eight screws to secure the assembly and case, a model sticker showing the keyboard's model number, serial number and country of origin, and six total feet. two being flip-out feet for adjusting the keyboard's angle and four being non-slip feet.\\ Internally, it features the flip-out feet mechanism and a sticker with identical information to the one found internally on the top case.
 +==Assembly==
 The assembly consists of a PCB and a painted steel plate. The assembly consists of a PCB and a painted steel plate.
  
Line 57: Line 57:
 Photographs [[https://www.flickr.com/photos/triplehaata/10990220614/in/album-72157637929694186/|"KI-5170"]] used under a [[https://creativecommons.org/licenses/by/4.0/deed.en/|CC BY 4.0]] license, © Jacob Alexander, November 21, 2013 Photographs [[https://www.flickr.com/photos/triplehaata/10990220614/in/album-72157637929694186/|"KI-5170"]] used under a [[https://creativecommons.org/licenses/by/4.0/deed.en/|CC BY 4.0]] license, © Jacob Alexander, November 21, 2013
  
-Don't forget to tag the page when done  
 {{tag>wip keyboard:sense-contact keyboard:sense-inductive keyboard:protocol-AT keyboard:layout-at keyboard:keycaps-doubleshot keyboard:oem-adi}} {{tag>wip keyboard:sense-contact keyboard:sense-inductive keyboard:protocol-AT keyboard:layout-at keyboard:keycaps-doubleshot keyboard:oem-adi}}
  
keyboard/adi_5170.1775937538.txt.gz · Last modified: 11 Apr 2026 19:58 by coolpenguin1
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International


  • Show page
  • Old revisions
  • Backlinks
  • Recent Changes
  • Media Manager
  • Sitemap
  • Register