Both sides previous revisionPrevious revisionNext revision | Previous revision |
keyboard:cooler_master_novatouch_tkl [18 Feb 2024 04:44] – Adding pictures, including one owned by someone else that I'm hopefully citing correctly tobleh | keyboard:cooler_master_novatouch_tkl [08 Apr 2024 16:13] (current) – tobleh |
---|
====== Cooler Master Novatouch TKL ====== | ====== Cooler Master Novatouch TKL ====== |
| |
<WRAP center round important 60%> | |
This page is currently a **work in progress!** If you have any documentation regarding the Cooler Master Novatouch, or images of the keyboard - particularly of the ISO variant; please feel free to provide and document them! | |
</WRAP> | |
| |
<WRAP wfix right> | <WRAP wfix right> |
| |
</WRAP> | </WRAP> |
| |
The Cooler Master Novatouch TKL is a keyboard sold by Cooler Master that uses Topre switches. This keyboard is notable for having using Cherry MX mount, compatible with modern custom keycap sets. The keyboard was released in late 2014 ((Niels Broekhuijsen (23 September 2014), retrieved from Tom's Hardware 7 February 2024 - [[https://web.archive.org/web/20240207191854/https://www.tomshardware.com/news/cooler-master-storm-novatouch-tkl,27737.html|"Cooler Master's NovaTouch TKL Has Expensive Topre Switches"]])); and discontinued sometime around 2016 as claimed by a Cooler Master employee on Reddit. ((CM_Glenn [username], (1 September 2016). Retrieved and archived 7 February 2024. Comment from [[https://web.archive.org/web/20240207181858/http://web.archive.org/screenshot/https://www.reddit.com/r/MechanicalKeyboards/comments/50mt2u/comment/d75ax88/|"Win Something Money Can't Buy; NovaTouch TKL Slider Set."]])) | The Cooler Master Novatouch TKL is a keyboard sold by Cooler Master that uses Topre switches. This keyboard is notable for having using Cherry MX mount, compatible with modern custom keycap sets. The keyboard was released in late 2014 ((Niels Broekhuijsen (23 September 2014), retrieved from Tom's Hardware 7 February 2024 - [[https://web.archive.org/web/20240207191854/https://www.tomshardware.com/news/cooler-master-storm-novatouch-tkl,27737.html|"Cooler Master's NovaTouch TKL Has Expensive Topre Switches"]])); and discontinued sometime around 2016 as claimed by a Cooler Master employee on Reddit. ((CM_Glenn [username], (1 September 2016). Retrieved from Reddit and archived 7 February 2024. Comment from [[https://web.archive.org/web/20240207181858/http://web.archive.org/screenshot/https://www.reddit.com/r/MechanicalKeyboards/comments/50mt2u/comment/d75ax88/|"Win Something Money Can't Buy; NovaTouch TKL Slider Set."]])) |
| |
| |
| <WRAP center round important 60%> |
| If you have any documentation regarding the Cooler Master Novatouch, or images of the keyboard - particularly of the retail ISO and any prototype variants; please feel free to provide and document them! |
| </WRAP> |
| |
===== Description ===== | ===== Description ===== |
This keyboard uses capacitive Topre switches with a Cherry MX compatible keycap mount. | This keyboard uses capacitive Topre switches with a Cherry MX compatible keycap mount. |
| |
The keyboard was sold in both 87 key ANSI and 88 key ISO variants. The case is of a wrap-around design, with a Micro-USB port on the back for plugging in a detachable cable. The keyboard has "CM STORM" branding on the back edge on the side opposite of the Micro-USB port. The keyboard is capable of N-Key rollover on Windows ((Cooler Master. Novatouch TKL. [[https://web.archive.org/web/20240207185549/https://www.coolermaster.com/catalog/peripheral/keyboards/novatouch-tkl/|Retrieved and archived]] on 7th February 2024.)), but defaults to 6-key rollover on other operating systems. | The keyboard was sold in both 87 key ANSI and 88 key ISO variants. On the back, the keyboard has "CM STORM" branding, along with a Micro-USB port on the back for plugging in a detachable cable. The stock cable is of a braided design, with a straight USB-A plug and a right-angled Micro-USB plug. |
| |
| <gallery> |
| keyboard:014-nt-branding.jpg |
| keyboard:015-nt-usb-port.jpg |
| keyboard:011-nt-stock-cable.jpg |
| </gallery> |
| |
| According to the quick start guide((Cooler Master (2014). Novatouch TKL Quick Start Guide. [[https://archive.org/details/novatouch-tkl_quick-start-guide|Scanned 7 February 2024, archived 18 February 2024.]])), the Novatouch is capable of N-Key rollover on Windows, but defaults to 6-key rollover on other operating systems. Using the FN key along with one of the function row keys allows further functionality; F1 to F4 adjusts the typematic repeat rate, with settings of 1x, 2x, 4x, and 8x speeds; F5 to F8 is used to play or pause, stop, skip to previous track, or skip to the next track; F9 is used as a "Windows Lock" to disable the Windows/Super key;and F10 to F12 controls the volume by either muting, decreasing, or increasing the volume. |
| |
===== Construction ===== | ===== Construction ===== |
The top case is of a wrap-around design. The top case has hidden clips along the top and bottom edges of the bottom case, then further secured using four black pan-head screws that screw up from the bottom case into screw sockets in the top case. The bottom case has four holes for these screws - two of them are exposed, whilst the other two are covered by the rear label and a warranty sticker - therefore requiring puncturing or peeling off said stickers to disassemble the keyboard.(([[https://www.flickr.com/photos/johndiew0107/15499083901/in/album-72157648227797928/|John Diew (September 28, 2014), "CM Storm Novatouch - 10" [Photo].]] Image licensed under [[https://creativecommons.org/licenses/by-nc-sa/2.0/|Creative Commons Attribution-NonCommerical-ShareAlike 2.0 Generic,]] retrieved February 17th 2024 from Flickr.)) There are four anti-slip rubber pads on the case, along with two flip-out feet that adjust the typing angle. The flip out feet has two additional anti-slip rubber pads to prevent slipping when the feet are extended out. | The top case is of a wrap-around design. The top case has hidden clips along the top and bottom edges of the bottom case, then further secured using four black pan-head screws that screw up from the bottom case into screw sockets in the top case. The bottom case has four holes for these screws - two of them are exposed, whilst the other two are covered by the rear label and a warranty sticker - therefore requiring puncturing or peeling off said stickers to disassemble the keyboard.((Photograph [[https://www.flickr.com/photos/johndiew0107/15499083901/in/album-72157648227797928/|"CM Storm Novatouch - 10"]] used under a [[https://creativecommons.org/licenses/by-nc-sa/2.0/|CC BY-NC-SA 2.0]] license, © John Diew, October 11 2014.)) There are four anti-slip rubber pads on the case, along with two flip-out feet that adjust the typing angle. The flip out feet has two additional anti-slip rubber pads to prevent slipping when the feet are extended out. |
| |
<gallery> | <gallery> |
keyboard:004-nt-top-case.jpg | keyboard:004-nt-top-case.jpg |
keyboard:john_diew-novatouch-back.jpg | keyboard:cm_storm_novatouch_-_10.jpg |
</gallery> | </gallery> |
| |
keyboard:005-nt-back-case-inside.jpg | keyboard:005-nt-back-case-inside.jpg |
keyboard:006-nt-keyassemble-front.jpg | keyboard:006-nt-keyassemble-front.jpg |
| keyboard:012-nt-usb-part.jpg |
</gallery> | </gallery> |
| |
The keyboard assembly consists of individual sliders and housings clipped into a steel metal plate, sitting over a rubber dome mat that covers capacitive cone-shaped springs that interact with the PCB to increase or decrease capacitance; this assembly is assembled using two different types of screws - 12 silver screws along the edge of the PCB with their location indicated by silk-screened circles, and 20 black screws throughout the PCB with locations indicated by arrows. The rubber dome mat sticks to the PCB from the factory; this seal may weaken overtime if the user frequently disassembles the assembly. The PCB also has two JST sockets - one slim one near the edge of the PCB that is left unused for normal usage, and a 5-pin JST socket where the Micro-USB port connects to the keyboard assembly. There are three holes in the metal plate underneath the Scroll Lock, F9, and Caps Lock keys; the holes under the Scroll and F9 key are covered entirely by the switch housing, whilst the hole under the Caps Lock key is exposed. On corresponding positions on the PCB are points where an LED could be soldered into the keyboard assembly, but are left unused. | The keyboard assembly consists of individual sliders and housings clipped into a steel metal plate, sitting over a rubber dome mat that covers capacitive cone-shaped springs that interact with the PCB to increase or decrease capacitance; this assembly is assembled using two different types of screws - 12 silver screws along the edge of the PCB with their location indicated by silk-screened circles, and 20 black screws throughout the PCB with locations indicated by arrows. The rubber dome mat sticks to the PCB from the factory; this seal may weaken overtime if the user frequently disassembles the assembly. The PCB also has two JST sockets - one slim one near the edge of the PCB that is left unused for normal usage, and a 5-pin JST socket where the Micro-USB port connects to the keyboard assembly. The PCB also has stickers and markings on the back; this includes the Topre branding, as well as a possible date stamp - the particular example shown lists a date of 2014 June 06. |
| |
<gallery> | <gallery> |
keyboard:007-nt-keyassemble-back.jpg | keyboard:007-nt-keyassemble-back.jpg |
| keyboard:018-nt-pcb-stickers.jpg |
| keyboard:017-nt-domes.jpg |
| </gallery> |
| |
| There are three holes in the metal plate underneath the Scroll Lock, F9, and Caps Lock keys; the holes under the Scroll and F9 key are covered entirely by the switch housing, whilst the hole under the Caps Lock key is exposed. On corresponding positions on the PCB are points where an LED could be soldered into the keyboard assembly, along with SMD resistors for each of the lights, but are left unused in the retail keyboard. Prototype versions of this keyboard have been documented to have these LEDs and corresponding resistors. ((Muirium [username], (2014 October 2014). Archived 14 April 2019, retrieved 17 February 2024 from Deskthority. [[https://web.archive.org/web/20190414040745/https://deskthority.net/viewtopic.php?t=8968|"A Tale of Two Switches: The Cooler Master NovaTouch"]] [Online forum thread.])) |
| |
| <gallery> |
| keyboard:016-nt-lock-light-resistors.jpg |
keyboard:004-nt-caps_lock.jpg | keyboard:004-nt-caps_lock.jpg |
keyboard:008-nt-scroll_win_lock.jpg | keyboard:008-nt-scroll_win_lock.jpg |
<gallery> | <gallery> |
keyboard:002-nt-nocap.jpg | keyboard:002-nt-nocap.jpg |
| </gallery> |
| |
| The 1 unit keys consist of a black Topre housing, along with a purple slider with the Cherry MX cross mount. |
| |
| <gallery> |
| keyboard:019-nt-1u-switch.jpg |
</gallery> | </gallery> |
| |
| |
The housings for other stabilized keys have three holes - one that interfaces with the centre keycap stem, and two that allows the other keycap stems to freely move through. The holes on the left and right of the housing have "crowns" that protrude upward. The slider has two semi-circle nubs that poke through the left and right holes of the housing. | The housings for other stabilized keys have three holes - one that interfaces with the centre keycap stem, and two that allows the other keycap stems to freely move through. The holes on the left and right of the housing have "crowns" that protrude upward. The slider has two semi-circle nubs that poke through the left and right holes of the housing. |
| |
| <gallery> |
| keyboard:020-nt-2u-switch.jpg |
| </gallery> |
| |
Disassembly of the keyboard assembly is required to access the wires for stabilized keys and the spacebar stabilizer. | Disassembly of the keyboard assembly is required to access the wires for stabilized keys and the spacebar stabilizer. |
Cooler Master had sent prototypes to various members of the online keyboard community prior to the release of the Novatouch in 2014. The prototypes lacked the rear label and warranty stickers, slightly different alignment for some of the laser and infilled keys, had laser-etched backlit keycaps for the Caps Lock, F9, and Scroll Lock keys, and had corresponding blue LEDs for these keys. ((YuukiHaruto [username], (6 April 2014). Archived 26 July 2014, retrieved 17 February 2024 from GeekHack. [[https://web.archive.org/web/20140726070046/https://geekhack.org/index.php?topic=56838.0|"CM Storm Novatouch Pre-Launch Showcase & First Impressions & Typing test"]] [Online forum thread].)) ((Muirium [username], (2014 October 2014). Archived 14 April 2019, retrieved 17 February 2024 from Deskthority. [[https://web.archive.org/web/20190414040745/https://deskthority.net/viewtopic.php?t=8968|"A Tale of Two Switches: The Cooler Master NovaTouch"]] [Online forum thread.])) | Cooler Master had sent prototypes to various members of the online keyboard community prior to the release of the Novatouch in 2014. The prototypes lacked the rear label and warranty stickers, slightly different alignment for some of the laser and infilled keys, had laser-etched backlit keycaps for the Caps Lock, F9, and Scroll Lock keys, and had corresponding blue LEDs for these keys. ((YuukiHaruto [username], (6 April 2014). Archived 26 July 2014, retrieved 17 February 2024 from GeekHack. [[https://web.archive.org/web/20140726070046/https://geekhack.org/index.php?topic=56838.0|"CM Storm Novatouch Pre-Launch Showcase & First Impressions & Typing test"]] [Online forum thread].)) ((Muirium [username], (2014 October 2014). Archived 14 April 2019, retrieved 17 February 2024 from Deskthority. [[https://web.archive.org/web/20190414040745/https://deskthority.net/viewtopic.php?t=8968|"A Tale of Two Switches: The Cooler Master NovaTouch"]] [Online forum thread.])) |
| |
{{tag>keyboard:protocol-USB keyboard:sense-capacitive keyboard:layout-compact keyboard:layout-tenkeyless keyboard:keycaps-lasered keyboard:oem-topre wip}} | ===== Gallery ===== |
| <gallery> |
| keyboard:001-nt-front.jpg |
| keyboard:002-nt-nocap.jpg |
| keyboard:014-nt-branding.jpg |
| keyboard:015-nt-usb-port.jpg |
| keyboard:004-nt-caps_lock.jpg |
| keyboard:004-nt-top-case.jpg |
| keyboard:CM_Storm_Novatouch_-_10.jpg |
| keyboard:005-nt-back-case-inside.jpg |
| keyboard:006-nt-keyassemble-front.jpg |
| keyboard:007-nt-keyassemble-back.jpg |
| keyboard:016-nt-lock-light-resistors.jpg |
| keyboard:018-nt-pcb-stickers.jpg |
| keyboard:017-nt-domes.jpg |
| keyboard:008-nt-scroll_win_lock.jpg |
| keyboard:009-nt-back-case-stamps.jpg |
| keyboard:010-nt-top-case-stamps.jpg |
| keyboard:011-nt-stock-cable.jpg |
| keyboard:019-nt-1u-switch.jpg |
| keyboard:020-nt-2u-switch.jpg |
| </gallery> |
| |
| ==== Acknowledgements ==== |
| Photograph [[https://www.flickr.com/photos/johndiew0107/15499083901/in/album-72157648227797928/|"CM Storm Novatouch - 10"]] used under a [[https://creativecommons.org/licenses/by-nc-sa/2.0/|CC BY-NC-SA 2.0]] license, © John Diew, October 11 2014. |
| |
| {{tag>keyboard:protocol-USB keyboard:sense-capacitive keyboard:layout-compact keyboard:layout-tenkeyless keyboard:keycaps-lasered keyboard:oem-topre}} |