Differences

This shows you the differences between two versions of the page.

--- keyboard:focus_fk-747 [12 Apr 2026 15:32] – coolpenguin1
+++ keyboard:focus_fk-747 [16 Apr 2026 18:01] (current) – coolpenguin1
@@ Line 8: / Line 8: @@
 | **Protocol** | [[AT protocol| AT]] / [[XT protocol| XT]] |
 | **Keycaps** | [[terminology:pad-print|ABS Pad-print]]\\ [[terminology:dye_sublimation|Dye-sub PBT]] |
+</WRAP>
+<WRAP center round important 60%>
+The standard FK-747 is missing photos; please provide them if you can!
 </WRAP>
 The Focus FK-747 was a AT layout keyboard produced by Focus Electronics.
 ==== Description ====
-The FK-747 is currently documented to come in two different models with major differences between the two:
+The FK-747 is currently documented to come in two different models with major differences between them:
-FK-747-0 with a case marked "FK-7700", Omron B3G-S White switches and Omron made PBT dye-sub keycaps.
+FK-747-0, with a case marked FK-7700-U, Omron B3G-S White switches and Omron made PBT dye-sub keycaps.
-FK-747 which uses the standard FK-747 case, Alps SKCM Blue or Omron B3G-S Amber((Image archive of a unlisted Xianyu listing[[https://imgur.com/a/SS7cSPe]])) switches and Focus made ABS pad-print keycaps.
+FK-747, which uses the standard FK-747 case, Alps SKCM Blue switches ((Chyros FK-747 Review[[https://www.youtube.com/watch?v=LgciNDqpjKM]])) or Omron B3G-S Amber((Image archive of a unlisted Xianyu listing[[https://imgur.com/a/SS7cSPe]])) switches and Focus made ABS pad-print keycaps.
 ==== Construction ====
@@ Line 23: / Line 27: @@
 ===FK-747-0===
 ==Top case==
-Externally, the upper section above the top row of keys has a ridge sloped facing towards the back of the keyboard with a lock-light sticker in it's top-right corner.\\
+Externally, the upper section above the top row of keys has a ridge sloped facing toward the back of the keyboard with a lock-light sticker in its top-right corner.\\
-Internally, there are standoffs with brass screw inserts for fastening the two case pieces together, a 'FK-7700-U' marking, plastic pegs for aligning the assembly and the flip out feet mechanism.
+Internally, there are standoffs with brass screw inserts for fastening the two case pieces together, a FK-7700-U marking, plastic pegs for aligning the assembly and the flip-out feet mechanism.
 ==Bottom case==
-Externally, the bottom has serial number sticker (74706290 on the documented example), separate QC and country of origin stickers, a AT/XT switch cutout and 6 total feet: 4 non-slip feet and two flip-out feet.\\
+Externally, the bottom has a serial number sticker (74706290 on the documented example), separate QC and country of origin stickers, an AT/XT switch cutout and six total feet: four non-slip feet and two flip-out feet.\\
-Internally, the bottom case has a AT/XT switch daughter board, a piece of tape for preventing the PCB from shorting on the bottom and what appears to be a grounding point for the assembly and DIN-5 cable.
+Internally, the bottom case has an AT/XT switch daughter board, a piece of tape for preventing the PCB from shorting on the bottom and what appears to be a grounding point for the assembly and DIN-5 cable.
 ==Assembly==
-The top of the PCB has a Focus logo with a barely visible 'FK-747-0' model number below the mounting plate.\\
+The top of the PCB has a Focus logo with a barely visible FK-747-0 model number below the mounting plate.\\
-The bottom of the PCB has another Focus logo with a FK-747-0 model number and a FK-727 model number below that.
+The bottom of the PCB has another Focus logo with an FK-747-0 model number and an FK-727 model number below that.
 ===FK-747===
@@ Line 36: / Line 40: @@
 Externally, it has a long sticker above the top row with blocks for writing F key functions and transparent windows for the lock-light bank.\\ Internally, it has threaded plastic standoffs for fastening the two case pieces together and standoffs with brass inserts for the assembly.
 ==Bottom case==
- Externally, it has an AT/XT switch with a AT/XT sticker next to it and four feet in total: two non-slip feet and two flip-out feet with hooks for routing the DIN-5 cable. The back also has a S/N sticker, a QC sticker and a country of origin sticker.\\ Currently, there are no known internal photos of the FK-747's bottom case.
+ Externally, it has an AT/XT switch with an AT/XT sticker next to it and four feet in total: two non-slip feet and two flip-out feet with hooks for routing the DIN-5 cable. The back also has an S/N sticker, a QC sticker, and a country of origin sticker.\\ Currently, no internal photos of the FK-747's bottom case are known.
 ==Assembly==
-The top of the PCB has a FK-747 marking visible in a plate cutout under the spacebar.
+The top of the PCB has an FK-747 marking visible through a plate cutout under the spacebar.\\
-The bottom of the FK-747 PCB has Focus logo and a FK-727/747 marking.
+The bottom of the FK-747 PCB has a Focus logo and an FK-727/747 marking.
 === Keycaps ===
-The keycaps used on the standard FK-747 are the same Focus made ABS pad-prints typically found on early Focus keyboards such as the FK-727 and FK-555.\\
+The keycaps used on the standard FK-747 are the same Focus made ABS pad-printed keycaps typically found on early Focus keyboards such as the FK-727 and FK-555.\\
-On the FK-747-0, the keycaps are PBT dye-subs made by Omron which are usually found on Omron's B5G-S switches of keyboards.
+On the FK-747-0, the keycaps are PBT dye-subs made by Omron, which are usually found on Omron's B5G-S series of keyboards.
 ==== Gallery ====
 ==FK-747-0==
@@ Line 59: / Line 63: @@
 FK-747-0 photos taken by reddit user u/jensgk and used with permission under the CC BY-NC-SA 4.0 license.
+{{tag>wip keyboard:sense-contact keyboard:protocol-at keyboard:protocol-xt keyboard:keycaps-padprint keyboard:keycaps-dyesub keyboard:oem-focus keyboard:layout-at}}
-{{tag>wip keyboard:sense-contact keyboard:protocol-at keyboard:protocol-xt keyboard:keycaps-doubleshot keyboard:oem-focus keyboard:layout-at}}