Differences

This shows you the differences between two versions of the page.

--- keyboard:monterey_k2ax [12 Apr 2026 00:53] – coolpenguin1
+++ keyboard:monterey_k2ax [12 Apr 2026 14:01] (current) – coolpenguin1
@@ Line 10: / Line 10: @@
 </WRAP>
-Write a small 1-2 line blurb about the keyboard here
-==== Description ====
+<WRAP center round important 60%>
-Describe general aspects of the keyboard
+Missing pictures of the Mitsumi model; please provide them if you can!
+</WRAP>
+==== Description ====
+The Monterey K2AX is a AT layout keyboard produced by Monterey. It's currently been documented to come with ABS doubleshot keycaps and Mitsumi KLT((VelonicV's DT WTS post[[https://deskthority.net/viewtopic.php?p=485358&hilit=monterey#p485358]])) or Alps SKCM Blue switches.
+It's currently been documented to have been rebranded by Suntouch and Jameco Electronics((Geekhack post[[https://geekhack.org/index.php?topic=61719.0]])). It's also been documented as Staff branded, however Staff was a sub-brand of Monterey ((APC 1987 Hardware Buyers Guide[[https://archive.org/details/apc_1987_hardware_buyers_guide/page/84/mode/2up]]))
 ==== Construction ====
 === Case and Internals ===
-Talk about the case and what's inside the case! Such as PCB, plate or no plate, daughterboards, etc
+The keyboard consists of three parts: a ABS top case, painted steel bottom case, and an internal assembly
+==Top case==
+Externally, the top case has a pen holder above the top key row and a lock-light sticker in it's top right corner.\\
+Internally, it has the flip-out feet mechanism, standoffs with brass inserts for fastening the assembly to the top case, plastic standoffs for fastening the bottom case to the top and cable routing pegs.
+==Bottom case==
+Externally, the bottom has an AT/XT switch cutout, a sticker documenting the keyboard's serial number, country of origin and FCC ID, and four feet in total: two non-slip feet and two flip-out feet for adjusting the keyboard's angle.\\
+Internally, it has a rubber pad to prevent the PCB from shorting on the steel back case.
+==Assembly==
+The assembly is made up of a PCB and steel switch mounting plate.\\
+The PCB has a QC sticker and a 'K2-A' model number.
 === Keycaps ===
-Describe keycaps, including materials, legend application method, etc
+The keycaps are ABS doubleshots typically found in Monterey, some Chicony keyboards and various other vintage keyboards of the time. It's currently unknown if Monterey manufactured these keycaps or if it was done by a third party.
 ==== Gallery ====
+==Alps SunTouch Branded Model==
 <gallery showcaption>
 keyboard:monterey:k2ax-1.jpg
@@ Line 38: / Line 50: @@
 keyboard:monterey:k2ax-13.jpg.jpg
 </gallery>
-pretty pictures
+Solder (yes I know I need to redo some joints), scroll lock keycap and switches are not original. SKCM Blue top housing and slider were swapped into the switch photo for documentation purposes as that was the switch it originally came with.
+==== Unconfirmed Claims ====
+The K2AX could also come with SMK Vintage Linear switches or one if its many clones.\\ A listing for one which revealed the switch came up on eBay around 2023,((eBay preview image and discussion around it's switches[[https://imgur.com/a/aKBbvu5]])) although only a preview image of the keyboard survives.\\
-== Acknowledgements ==
+It uses different keycaps, likely the same ones commonly found on Hottek keyboards, so this version should be easily identifiable.
-Any acknowledgements you may have
-Don't forget to tag the page when done
 {{tag>wip keyboard:sense-contact keyboard:protocol-at keyboard:protocol-xt keyboard:keycaps-doubleshot keyboard:oem-monterey keyboard:layout-at}}