Differences

This shows you the differences between two versions of the page.

--- switch:alps_skcm_black [28 Dec 2023 12:52] – eris
+++ switch:alps_skcm_black [04 Nov 2025 22:22] (current) – ↷ Links adapted because of a move operation 74.7.227.237
@@ Line 24: / Line 24: @@
 The tactile feedback is generated with a leaf spring that is situated on the opposite side of the housing to the contact module. There were at least two variations of this leaf spring.
-Alps SKCM Beige, like all SKCM/SKCL series switches, uses a contact module to register the keypress. This sits in the housing on the side with visible notches.
+Alps SKCM Black, like all SKCM/SKCL series switches, uses a contact module to register the keypress. This sits in the housing on the side with visible notches.
 ==== Additional Information ====
@@ Line 30: / Line 30: @@
 The switch was likely in production from 1989 to around 2000 in some form or another. The switch replaced the first generation switch [[:switch:alps_skcm_beige|Alps SKCM Beige]], with SKCM Black switches sometimes appearing in keyboards with SKCM Beige, possibly as a later service part.
-Third generation SKCM Black also replaced [[switch:alps_skcm_salmon|SKCM Salmon]] after its discontinuation, despite no obvious direct relation to that switch.
+Third generation SKCM Black also replaced [[switch:alps_skcm_tan|SKCM Salmon]] after its discontinuation, despite no obvious direct relation to that switch.
 The leaf spring that generates the tactile event had at least one revision. The original form of this leaf spring was identical to that of SKCM Beige. The later form is the "dimple" leaf most commonly associated with late [[:switch:alps_skcm_ivory|SKCM Ivory]] and all [[:switch:alps_skcm_white_ivory|SKCM White Ivory]].