Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
switch:alps_skcm_blue [28 Dec 2023 10:42] – erisswitch:alps_skcm_blue [28 Dec 2023 20:42] (current) – eris
Line 21: Line 21:
 As a first generation SKCM/SKCL switch, the upper housing always has slits (colloquially referred to as the “pine” variant). Similar to other first generation switches, the only Alps branding on the switch is usually the older Alps logo on the bottom of the lower housing, however, on later switches the upper housing with the newer Alps logo is used. As a first generation SKCM/SKCL switch, the upper housing always has slits (colloquially referred to as the “pine” variant). Similar to other first generation switches, the only Alps branding on the switch is usually the older Alps logo on the bottom of the lower housing, however, on later switches the upper housing with the newer Alps logo is used.
  
-The stem, which is a dull shade of blue, was lubricated at the factory.+The stem, which is a dull shade of blue, was lubricated at the factory and is likely made of a nylon blend((tested via [[https://wiki.keyboard.institute/lib/exe/fetch.php?media=switch:skcmblueburntest.mp4|burn test]])).
  
 The audible feedback is generated with a leaf spring that is situated on the opposite side of the housing to the contact module. There were at least two variations of this leaf spring. The audible feedback is generated with a leaf spring that is situated on the opposite side of the housing to the contact module. There were at least two variations of this leaf spring.
Line 30: Line 30:
 The switch was likely in production from 1985((https://patents.google.com/patent/US4642433)) to around 1989. It has been seen with every variation of contact module used in the mainline SKCL/SKCM series, from the original tall black contact module((NEC PC8801)) to the short white contact module more commonly associated with the second generation of SKCM/SKCL switches((https://geekhack.org/index.php?topic=86189.0)). However, tall grey contact modules are most common. Variations in stem dye lots were commonplace and should not be taken as evidence of some instance of the switch being better than another. The switch was likely in production from 1985((https://patents.google.com/patent/US4642433)) to around 1989. It has been seen with every variation of contact module used in the mainline SKCL/SKCM series, from the original tall black contact module((NEC PC8801)) to the short white contact module more commonly associated with the second generation of SKCM/SKCL switches((https://geekhack.org/index.php?topic=86189.0)). However, tall grey contact modules are most common. Variations in stem dye lots were commonplace and should not be taken as evidence of some instance of the switch being better than another.
  
-The leaf spring that generates the tactile and audible events had at least one revision. The original form of this leaf spring had smaller lateral tabs and no bend at the bottom, as well as appearing visually to be made from a different material. The later form of this leaf spring is indistinguishable from that found in the successor, [[switch:alps_skcm_white|Alps SKCM White]].+The leaf spring that generates the tactile and audible events had at least one revision. The original form of this leaf spring had smaller lateral tabs and no bend at the bottom, as well as appearing visually to be made from a different material. This form is similar but not identical to the leaf found in [[:switch:alps_skcm_amber|Alps SKCM Amber]]. The later form of this leaf spring is indistinguishable from that found in the successor, [[switch:alps_skcm_white|Alps SKCM White]].
  
 In its later form, the switch as a whole is practically indistinguishable from Alps SKCM White. Indeed, there is significant overlap between the two switches with some early Alps SKCM White being factory lubed, which makes them completely identical to the latest Alps SKCM Blue. In its later form, the switch as a whole is practically indistinguishable from Alps SKCM White. Indeed, there is significant overlap between the two switches with some early Alps SKCM White being factory lubed, which makes them completely identical to the latest Alps SKCM Blue.
  
 There is also a heavier version of this switch, only observed so far in NEC PC-8801 keyboards with an extremely high weighting, marked with black marker on the stem. Given it does not appear to have been seen anywhere else, this is likely a customized switch and not part of the series proper. There is also a heavier version of this switch, only observed so far in NEC PC-8801 keyboards with an extremely high weighting, marked with black marker on the stem. Given it does not appear to have been seen anywhere else, this is likely a customized switch and not part of the series proper.
 +
 +<WRAP center round important 40%>
 +The following information is unsubstantiated. Take it with a grain of salt.
 +</WRAP>
 +
 +There is a purported "pale blue" variant with a very slightly different stem, however no disassembled pictures of the switch have ever been provided and it is impossible to substantiate any potential difference to the rest of the line, or indeed any Alps progeny. 
  
 ==== Gallery ==== ==== Gallery ====
switch/alps_skcm_blue.1703760178.txt.gz · Last modified: 28 Dec 2023 10:42 by eris
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International


  • Show page
  • Old revisions
  • Backlinks
  • Recent Changes
  • Media Manager
  • Sitemap
  • Register