This is an old revision of the document!


Apple Standard Keyboard

Apple Standard Keyboard
a bri*ish M0116
Switch Alps SKCM Orange
Alps SKCM Salmon
Alps SKCL Lock
Sense method Metal contact
Protocol ADB
Keycaps Dye-sub PBT

The Apple Standard Keyboard was introduced by Apple in 1987 alongside the Macintosh II and Macintosh SE computers. The example in the infobox, an M0116, was manufactured in 1990 in Ireland.

Description

The Apple Standard Keyboard shares a lot of traits with the Apple Extended Keyboard, which served as the full-size alternative during their years of production. Although both keyboards were introduced simultaneously, the Apple Standard Keyboard was advertised as the more affordable option at $129.1)

Known variants include:

  • M0116 - a variant with an ANSI-like layout and a convoluted bottom-row. All modifiers are labeled in English.
  • M0117 - a variant with an ISO-like layout and a simplified bottom-row. Most modifiers are labeled with an icon.

Presently, the widely-adopted terminology for the Apple Standard Keyboard is often the “M0116”.


Construction

Case & Internals

The Apple Standard Keyboard is easily identified by its unique compact aesthetic, recognized by its simple swooping shape along with a “ridged” appearance on the sides of the bottom case. The case is made entirely in ABS plastic with an average thickness of 3.4mm2), making it a fairly sturdy chassis, but it's worth mentioning that the corners are still susceptible to cracks and chips. Additionally, the ABS plastics used in Apple keyboards of this era had a tendency to yellow more rapidly than those found in other keyboards.

The case is divided into two halves, a top and bottom-case, as well as the internal assembly. The top-case is secured by 3 screws positioned at the back, along with 4 plastic clips underneath the lip.

Regarding serviceability, the entire keyboard can easily be disassembled, but newcomers may encounter some confusion during reassembly. The steel mounting plate must first slide into the 4 thin slits at the lip of the bottom-case before the upper-case can be fully closed. The photos below demonstrate the following:

Measuring at 1.2mm3) in thickness, the steel mounting plate is relatively average and doesn't possess any notable characteristics.

Switches

The Apple Standard Keyboard came equipped with either Alps SKCM Orange or its successor, the Alps SKCM Salmon.

The Caps Lock key is always replaced by an Alps SKCL Lock switch. However, the position of the Caps Lock key can vary between the M0116 and M0118 variants.

Keycaps

The keycaps, made primarily from PBT plastic, feature an oblique dye-sublimated fontface, excluding the spacebar which was made in ABS plastic. These keycaps boast a unique profile exclusive to Apple keyboards of that era. Peculiarly, the thickness of these keycaps is non-uniform, with all sides measuring at 1mm, except for the rear wall, which is slightly thicker at 1.5mm.

When paired with the thick all-plastic case, these keycaps contribute to a sound signature that is generally perceived as pleasant.


Additional Information

Hard-2KRO Limitation

In the majority of 2KRO keyboards, the user is free to press as many keys until a conflicting key in the matrix is pressed. As a result, most 2KRO keyboards have the potential to register more than two simultaneous key presses, with only certain combos blocked.

However, common at the time for Apple keyboards, the Apple Standard Keyboard came with a strict limitation of only 2 simultaneous key-presses, regardless of the respective keys' position in the matrix. This is likely done in the keyboard's factory firmware, as the Apple Standard Keyboard's matrix is observed to be capable of normal 2KRO behavior.

This makes the Apple Standard Keyboard rather unsuitable for tasks which may require complex key-combos, such as with gaming.


Layout-specific Serial Numbers

The following table depicts all recorded serial numbers, categorized based on their corresponding layouts.

Serial No. Layout Description
M0116 English (US) Standard layout.
M0116B English (UK) Similar to US layout, but has £ symbol.4)
M0117Z English English M0117 layout.5)
M0117AB Arabic Arabic M0117 layout.6)
M0117D German German M0117 layout.7)
M0117F French French M0117 layout.8)
M0117HB Hebrew Hebrew M0117 layout.9)
M0117S Finnish
Swedish
Finnish/Swedish M0117 layout.10)
M0117SF Swiss Swiss M0117 layout.11)
M0117Y Spanish Spanish M0117 layout.12)
M0117YU Yugoslavian Yugoslavian M0117 layout.13)



Apple Standard Keyboard (M0116, US)
  • Dated 1990, Week 3014)
  • FCC ID: BCG5K5M0116
  • Serial Number: 1275623


Apple Standard Keyboard (M0117HB, Hebrew)
  • FCC ID: BCG6LWM0117
  • Serial Number: AM0461MMM0117HB


Apple Standard Keyboard (M0117AB, Arabic)
  • FCC ID: BCG6LWM0117
  • Serial Number: AM93426PM0117AB


Apple Standard Keyboard (M0116B, UK)
  • Dated 1990, Week 2015)
  • FCC ID: BCG6LWM0116
  • Serial Number: AM0241HYM0116B

Note: Arrow keys were swapped around.


Apple Standard Keyboard (M0117D, German)
  • Dated 1989, Week 616)
  • Missing FCC ID
  • Serial Number: AM92007JM0117D
1)
InfoWorld (Aug. 1989), retrieved from Google Books - Apple's Macintosh Lineup Summary
2) , 3)
Measured with a caliper
4) , 6) , 9)
Documented in Gallery below
14) , 15) , 16)
Datestamp on a PCB chip.