This is an old revision of the document!
Unitek K-150M
| Unitek K-150M | |
| pretty picture goes here | |
| Switch | Cherry MX Black |
| Sense method | Metal contact |
| Protocol | AT / XT |
| Keycaps | ABS Pad-print |
The Unitek K-150M was a AT layout keyboard produced by Dah Yang. It uses ABS pad-print keycaps and comes Cherry MX Black switches.
Description
The K-150M was primarily used and sometimes rebranded by third party computer brands. Some of these include: Laser XT1), BY-COM2), PCS3) and S P C4).
Construction
Case and Internals
The keyboard consists of three parts: a ABS top, painted steel bottom case and an internal assembly
Top case
Externally, the top case has a lock-light sticker in it's top-right corner and a badge cutout in it's top-left.
There are currently no documented internal pictures.
Bottom case
Externally, there is a country of origin stamped into the bottom right and two stickers: one with the keyboard model number, serial number, FCC ID, manufacturer and country of origin; and the other being a warranty void if removed sticker. It also has six total feet, four non-slip feet and two flip-out feet with accompanying cutouts for them in the case.
There are currently no documented internal pictures.
Assembly
The top of the PCB has a serial number sticker. The bottom has a marking with the manufacturer (Dah Yang) and the model number (K150M).5)
Keycaps
The keycaps are MX mount ABS pad-prints presumably produced by Dah Yang.